Foscam R2 R4 Hood
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Foscam R2/R4 IP camera suffering from reflective glare can be helped by fitting this hood
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 147
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Summary
A friend of mine has a Foscam R2 IP camera which suffers from reflective glare, during periods of bright sunshine, when looking outside through window glass. This was the motivation for this simple, clip-on hood.
Following some feedback I have added an alternative version that has the following changes:
i. Slightly tighter grip on the camera (internal collar diameter reduction)
ii. Increased the depth of the ends of the collar to improve lateral stability
iii. Removed part of the collar immediately below the brim to allow it to sit further down the camera body
iv. Added a lateral ridge to strengthen the hood
v. Removed the branding from the collar
Print Settings
Printer:
Hictop i3 3D-P11 / Ender 3 S1
Rafts:
No
Supports:
Yes
Resolution:
0.1
Infill:
20