Liczymy pasujące modele…
These are storage trays for different common batteries designed for the Gridfinity organization system by ZackFreedman These were all made using the Gridfinity Rebuilt project. I also increased the detail of the models beyond the default…
To check for dimensions and tune accordingly, this cube should be printed as is in 30x30x30 mm. This guide can help you tune your printer in according to this model - AndrewEllis Print-Tuning-Guide If you want to tune your printer for…
July 27 2022 house keeping note: Somehow, reviews and makes for the older version of this fan duct have been showing up on this page, and reviews and makes for this updated version were showing up on the old versions page as well. To…
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.16-0.2mm (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed
R2D2 Added to versions of g-code: Note the 33 hour label assumes you are printing both. %100 = 24 hours %65 = 9 hours.
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** Thanks to the awesome Delta P duct design by @teookie,…
Update on Jan 25, 2026: Partial Height Bins are now available for CR2 & CR123A batteries. AA and AAA bins have also been revised to have an additional compartment. High-capacity bins have also been added. Gridfinity Stackable Storage for…
Remixed a caliper holder by Klave (linked) for the honeycomb storage wall. Hexagon's (connector) faces was offset by -0.15 for snap fit into the blank insert needed for the wall storage. The blank insert can be downloaded at…
The R2D2 kit Card has a multicolor and a single color print and is print in place! The R2Q5 is a Multicolor only and is also print in place you should use supports for both!
Hallo Freunde, ich biete euch hier einen Batterie Organizer in Getränkekasten form zum download an. Ihr findet hier Kästen für AA, AAA und 9V Batterien. Ich hoffe sie gefallen euch.
This is my model of the SSV Normandy SR2 from the Mass Effect series. It is the Alliance version from the third game. The model is some 50cm long and is a kit. The pieces are divided per their color. For the assembly, I recommend to watch…
I'll be honest, I didn't like some of the current cut and paste versions of the R2D2 Alexa Echo Dot 3 docks available, some of them had a lot of errors when slicing. I decided to make a "as close as possible" screen-accurate version from…
The original Bambu Lab swatch is OK but it had a few things that needed to be fixed. label: I've added a a slot for a standard 12x22 label with 2 mm corner radius - like those for Niimbot or Brother Label printers. If you don't have one,…
This is for Zach Freedman's Gridfinity. It can hold 22 CR2032 or 44 CR2016 batteries, 12 357/303/SR44 batteries, and 2 A23 batteries (commonly used in garage door openers). The A23 slots can hold AAA batteries, but the holder will no…
Simple but sturdy storage for 10 CR2032 coin cell batteries. MK3 has a few minor improvements over the original/MK2: Lip to hold the top on Thicker dividers to make them stronger Slightly more clearance to make coin cells easier to remove…
Holder for a CR2032 coin cell batteries. Battery is securely held in place Single (3V), double (6V) and triple (9V) versions Designed for use with breadboard jumper/dupont wires or bare wire Total holder thickness is 7.3mm for the single…
Based on the block template i designed some gridfinity battery holders i couldn't find online (at least not in this dense packing). Fusion files and STLs included for these batteries 40x LR44 8x/11x/14x CR123(A) 20x CR2032 12x CR1632 Note…
This is a remix of jphalip's Voron 2.4 A Drive PG7 umbilical mount, which was a remix of Hartk's PG7 mount. The endstop carrier in jphalip's model was from Minsekt . In this version the PG7 hole location has moved slightly to be centered…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
I have not FDM printed this model yet, but did have good results with a ps3 button I did years ago. I SLA printed this model out of ABS-like Prusa Resin for a custom project I did and thought the base file I made might be handy for…
This works well for my PSVR2. There are a few choices for the base that add extra weight in the front to reduce tipping over backwards. See the STL files for the base choices. I printed the simple ‘front bar’ one at first and then the…
Compatible with Cooler Master's MasterBox NR200 and MasterBox NR200P . The design of the bracket is ventilated for actively cooled units to be installed, independently from the orientation of the intake fan. The bracket is also compatible…
Find out everything you need to know about the battery box on my blog: https://nerd-corner.com/3d-printed-battery-container-for-cr2032/ or https://nerd-corner.com/de/3d-gedruckter-batteriebehaelter-fuer-cr2032/
My version of R2D2 with moving legs, head, and retractable center leg. I may try to do more detail work on the skin in the future, but I'm not very good with that stuff yet. Inspired by someone's version with wheels and moving head, but I…
This is a remix of MrTeliP and Voron 2.4r2 PG7 Cable Gland and Endstop, which was a remix of jphalip's and Hartk's PG7 mount. I added a new endstop mount so you don't loose any Y print area. The bumper of this mod from Cris Persi is…
Part of my series of enclosures designed for Shelly smart devices and Wago 221 connectors. Shelly box for T&E 3x slots and wago 221 connectors Shelly box for inline flex wire and Wago 221 connectors (this one) Shelly box for 2x flex wires…
A wall mount for Fanatec QR2. Not an exact copy of the base-side part (measured by caliper), but fits very well. Fix: fanatec_qr2_wall_mount and fanatec_qr2_wall_mount_indication No support is needed.
I saw broom grippers in store the other day so I challenged myself to design my own You can choose between 3M strips, double side tape* or screws* to install it However i have not tested the versions that uses double side tape or screws…
DIY your own PET filament from PET bottles! BEST Available machine for homemade bottle filament! Parts: https://petamentor2.com/parts/ Tutorial: https://petamentor2.com/tutorial/ Wiring: https://petamentor2.com/wiring-and-electronics/…
A half height beer crate to store 14x2 (28 total) CR2032 (or thinner) coin cells. Fully compatible with the original battery beer crate design. The gluable bottom part from the original also fits. Stacking two of these half height crates…
DJI Mini 3 - Mini 2 - Air 2 - Air2s Lanyard Mount It holds itself. You can leave it on the RC all the time. Version 2 This version for those who wants to fit controller to tight cases when the lanyard mount is already mounted. ( I…
All of the sensor offset mounts I could find were based on the original Elegoo CC design with 2 screws. Lots of people now have the one w/ a flap and 1 screw, including myself. So i made one. Only tool you need was provided w/ the…
One of the triggers was broken on my PS4 controller, and I decided to 3D model some new ones instead of replacing them with generic replacements. These are flat replacement L2 and R2 buttons for the first gen PS4 controller (CUH-ZCT1).…
A quick remix of only the duct from teookie's “Delta-P fan duct V2-R2 for MK3S(+) extruder” to include a slot for inserting an M3 square nut to provide for a more secure retention of the screw that goes through the lower right corner of…
UPDATE 2/10/2024: Be sure to check out the R2-D2 feet remix for use with the DUMMY 13 - Acrobatics pedestal I recently made a Lucky C-3PO by Printables user egz and decided there needed to be an R2-D2 to go along with it. If you like…
Bring the galaxy's most beloved astromech droid to life with this incredibly detailed 3D printable STL model that captures every iconic curve and panel line. This stunning figurine showcases R2-D2's classic cylindrical design with…
Update: V2 is released! Improvements include: Improved/intentional controller mounting spots previous spots to hold controllers were a happy accident Improved cable holder made it shorter, made the securing angle steeper Improved headset…
This is the stand you're looking for. If you like my work, please consider joining my patreon with Stand it Up Comics! https://www.patreon.com/Standitupcomics A little stand for the Alexa Dot 4, inspired by the astromech everyone loves.…
This is a remix of Tabb's Button Cell Battery Box from Thingiverse. It's a box for CR2032 and LR44 batteries. I have added four places where 4x1,5mm magnets can be fitted. This is a remix of this object:…
This model is originally from Tingiverse, made by Printer2261 also known as Shane Jackson. https://www.thingiverse.com/thing:5172136 But I thought that users of printables would also like to be able to print this, since the Tesla Model Y…
Minor redesign of jbergmans' 2032 battery storage. Can hold up to 8 batteries of types CR2032 and CR2025. Also see my model for CR1225 batteries: https://www.printables.com/fr/model/874743-cr1225-battery-holder Very easy to print, small…
I really liked the R2D2 designs that hold the Google Home Mini, the one that I liked the most was pbechard remix that has a tilt forward so we can see better the Google Home Mini. One thing that I noticed was that this model had some…
I really like the original design by Simomura, but found that I couldn't see the top lights of the Google Home Mini when interacting with it. My Home Mini sits by the TV and the angle of the R2D2 pointed the lights away from my viewing…
The design is fully tested but the documentation is work in progress, Please message if there any queries. Last edited 24\09\23. Attribution & Credit to the Voron Design Team I am not quite sure if this can be classed as a formal remix…
This is a remix of the great battery holder by @dhiltonp . I've moved the slots and adjusted them to be 2 slots for CR20XX batteries and 2 slots for LR44/SR44/other 11.5mm diameter batteries. Gridfinity is a project by Zack Freedman ,…
Star Wars R2D2 Planter Vase. Can we resized to any size that you like. Could also be sized to use as Pencil or Pen Holder or Candy Dish or Bowl. There is a small hole in the center of the planter to allow for water to not fill it up. I…
Combined stackable beer crate for AA, AAA, 9V Block, CR2032 and a empty crate for batterys. The crate needs a support geometry at the bottom.
This is version 2 (V2) of the Delta-P fan duct for BEAR. It has several updates compared to the original: Easier to print Better cooling Refined flow path CFD optimized Even cooling front to back and left to right Improved visibility of…
Remix for adding Voron logo. Remix and adding longer cover version for closing the expose wires.
This holder can contain 8 individual cr2032 batteries. Printed on a Prusa Mini in Orange Prusa PLA (Not Prusament) Part of the Gridfinity storage solution. What is that you say?
This shade for the Xreal Air2 AR glasses gives improved darkness over the ones supplied by Xreal.
I love the beer crates for storage! My button cells needed a new home, so I remixed again :-) This is a remix of 2 things, the famous battery beer crates and and a similar model found on thingiverse. I made some changes to the original…
First of all, thank you for downloading my model :D Amount of batteries in configs: 2x1 CR2032 x 16pcs LR44 x 12pcs 1x1 CR2032 x 8pcs LR44 x 6pcs Print settings: Speed: any (depends on printer) Infill: 10-100% Number of walls: 3-infinite…
A small holder for a 5 mm LED and a CR2032 coin cell. Snap the pieces together to make a simple, battery-powered tea light. No glue or soldering needed. Print it upside down, no support needed. TIP: flickering LEDs are available and would…
This is a remix of the MMU2S Selector FINDA version R2 (improved blade holder mentioned in release notes for Firmware 3.9.0) with a slot for a 6x2x10 magnet for improved FINDA reliability. (The magnet used is the smaller of the magnets…
* update * new harder version head available if you find this one to easy. https://www.printables.com/model/597903-star-wars-r2d2-lvl2-hard-edition-puzzle-with-windu Hey all couldn't find a a small r2-d2 that my rubbish printer could…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken ( https://www.3dchicken.co.uk ) These…
Uses two M8 x 20mm. Print at 20-25%. Designed based on the Fanatec QR2 non-pro mount. Compatible with Pro and regular version, but not lite version. Inspired by this model (for QR1): https://www.thingiverse.com/thing:4803197 OnShape…
CR2032 Battery Holder 1x 2x 2x2
Diese Box dient der Aufbewahrung von bis zu 20 Stück Batterien CD2032. Sie besteht aus einem Unterteil und einem Deckel. Der Deckel ist so gearbeitet, dass er gut auf dem Unterteil hält. Die Abstimmung von Haftung und Lösbarkeit habe ich…
This is a multicolor only evil version of R2D2 R2Q5! Prints with supports on any multicolor printer colors are red, silver, and black! THIS IS THE SEQUAL TO R2D2 KIT CARD!
couple of features charging cable tunnel , you can charge controllers while placing it on the stand print this completely supportless on FDM printer. have fun , i am starting a patreon where u can find my newer designs, please follow me…
This model snaps into the hole behind the power supply in the NR200 case through which the power supply intakes air. Normally there is a gap between the PSU and the ventilated side panel of the case, which allows the PSU to intake warm…
The Unifi Dream Router looks like an iconic droid from long time ago in a galaxy far, far away.... I came across this design but it wasn't really made for printing. I decided to clean it up to make it more printable. With it, the Unifi…
I created this battery adaptor for my aqara motion sensor as I had plenty of CR2032 batteries but no CR2450. Version 2 is 4mm thick that fitted perfectly with the motion sensor. I have included the 5mm version for other applications.
This is better printed in ABS/ASA to whitstand the heat, it is designed to be wrapped either in fabric or vinyl. A printer with a 250 size bed is needed all parts can be printed without any support altough brim is recommended for some.…
Fundido con PLA, altura de capa 0.2, relleno 15% y cambio de filamentos M600 en PrusaSlicer. Imprime con moderación.
This is a remix of the referenced Nozzle Scrubber by FunFunBoy. This version changes the magnets to 10mm and increases the count to 3 on each of the Bucket and Holder parts. Minor changes were made to the brush holder to accommodate…
I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … Pre-colored .3mf file included. Best to be printed in wall…
Model of the robot R2D2 from Starwars Still some work to complete it but I thought I would upload it anyway
Since there is a battery holder design contest going on, I thought it may be useful to have a reference model of a CR2032 battery for which holder can be created. The model is measured from an Energizer CR2032 battery. Model can be…
Simple but sturdy storage for 10 CR2025 coin cell batteries. This is based on my CR2032 coin cell holder design, but the following User Parameters changed: cell_diameter = 20mm cell_thickness = 2.5mm See the original model under “This…
These covers allow for hidden cable routing for wires going up the Z Extrusions, they also have a cutout in case you didn't leave enough room under the Z Rails(most people don't :P). In case you want to add some extra pop to your covers,…
Here's one of R2D2 I did a couple of years ago and forgot to post. Enjoy ;) Note: I've added a V2 of R2D2, as I'd just noticed that there was some detail on R2's head that didn't look like it was supported properly and might be prone to…
Holder for digital / vernier caliper. Relies on the “insert-empty” hex part (or similar x2 x4 joiner parts) used in the HoneyComb Wall. Further types of insert-empty can be found here (reduced friction) and here (rotated position). Hex…
Bring a galaxy far, far away to your desk - with a wiggle! This R2-D2-inspired flexi bot is an articulated, print-in-place design - no supports, no assembly for FDM, just instant Star Wars fun! 🛠 Easy support free print in place printing.…
Compatible with Cooler Master's MasterBox NR200 and MasterBox NR200P . We are making free to print and modify the design for the clips that hold the paneling of our most beloved ITX enclosure(s)! Lost one? Your product is out of warranty?…
Revision 1: 2025-11-15 Revise Amazon links per currently available items Reflect Happy Hare's incorporation of Filamentrix's Filament Cutter into its code base Introduction The Voron 2.4R2 with Happy Hare provides a means to cut off the…
“These are not the tissues you are looking for” – Obi-Wan Kenobi (in 0 ABY to a Stormtrooper with allergies) Assembly The model is stored as a single multi-part STL file in “R2-D2 Tissue Box v8.stl”. Don’t touch it. Just don’t. If you…
May the 4th Be With You! If you like this kind of stuff consider supporting me on www.patreon.com/wekster Models are multimaterial (for machines like mmu, ams, palette) not the multipart that you can assemble later!
R2D2 bobblehead for your printer. Just add G-Code and enjoy the bobble! https://youtu.be/3HwXJQMGgsQ https://youtu.be/y7rcWTLWsCM https://youtu.be/5cWb99a7tlI Printing Base, head, and spring can be printed without supports. Ideal line…
Storage Box for AA/AAA/CR2032/9V Battery or /SD/Micro SD/or small parts 3 Type of lid type 1 full closed no stakable option no inscription type 2 for stakable option no inscription type 3 for stakable option with inscription infill 10 %
Printed with Prusament PETG Jetblack 0.3mm no rafts or supports required.
Find out everything you need to know about the battery box on my blog: https://nerd-corner.com/3d-printed-battery-container-for-cr2032/ or https://nerd-corner.com/de/3d-gedruckter-batteriebehaelter-fuer-cr2032/
Based on djkrice organizer for SO-DIMMs. Fits 10 DIMMs, can fit more if you edit the .scad (it also has the measurement for SO-DIMMs). Can be stacked. The honeycomb pattern on the bottom is to save filament without being detrimental to…
Compatible with Cooler Master's MasterBox NR200 and MasterBox NR200P . We are making free to download, remix and modify the design of the top panel of our most beloved ITX enclosure(s)! You can easily modify it to add support for a…
Simple CR2032 coin battery container.
Part of my series of enclosures designed for Shelly smart devices and Wago 221 connectors. Shelly box for T&E 3x slots and wago 221 connectors (this one) Shelly box for inline flex wire and wago 221 connectors Shelly box for 2x flex wires…
Remix of container for CR2032 batteries.
Update 20240531: Fusion 360 file uploaded for customization. Battery name text could also be changed in PrusaSlicer by cutting the old text away and using PrusaSlicer's text command. Storage case for CR2032 batteries. Sliding lid allows a…
Just a simple 2032 battery holder, holds 10 batteries
This is an expanded version of Jason D Modular Battery Holder. I've made several changes to clean up all the “remixes” out there, make the modules truly standardised and “OCD friendly”. I was basically annoyed how different remixes…
This is a work in progress for the NR200- adding a side panel extension that's 3D printable to allow for taller CPU coolers like the NH-D15. Currently my designed clips hold the side panel 15mm out from the side (extending the 153-155mm…
Dies for Philips Pasta Maker Viva HR2333 I have created dies for making different pasta shapes: pappardelle, spaghetti alla chitarra, spirali, tagliatelle, vermicelli. I put the source in CadQuery in case you want to make your own…
Any feedback would be greatly appreciated . Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Small little R2D2 with some details. Supports needed.
This is a remix of dhiltonp's battery holder that fits CR2450 and CR1620 batteries
Protect PSVR2 USB-C plug and PS5 USB-C socket in case of accidental cable pulling to sides. Printed from PETG, 0.4mm layer, 15% infill. Any (almost) settings will work. Fusion 360 source included.
Revised all files in April 2026. This is my interpretation in Gauge 1 (1:32) of the Kds 54 / Ucs 908 Silowagon operated by Deutsche Bundesbahn. http://www.dybas.de/dybas/gw/gw_u_9/g908.html…
R2 D2 aus Star Wars Category: Art
![#0017 [Remix] X2 Delta P Duct [V2R2.2] for the MK3S(+) [New Flow Splitter]](https://media.printables.com/media/prints/155387/images/3720913_fbdbd996-a1de-4291-8b9e-a4c2554d6d73/mod2-and-3leds.jpg)
