1 / 1
Voron 2.4R2 Nozzle Cleaner & Purge Bucket — zdjęcie 1

Voron 2.4R2 Nozzle Cleaner & Purge Bucket

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Brush Holder and magnetically attached filament Purge Bucket

Ocena
5 / 5
Polubienia
121
Pobrania
692
Wydruki
1
Wyświetlenia
9776
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution

This is a remix of the referenced Nozzle Scrubber by FunFunBoy.   This version changes the magnets to 10mm and increases the count to 3 on each of the Bucket and Holder parts.  Minor changes were made to the brush holder to accommodate brushes sourced from Amazon.

Trim the Brush Head as required to fit into the mount with a slight interference fit.  Insert the trimmed brush head into the mount and fasten the mount to the RH print bed rail 1mm from the aft side of the milled print bed.

The following Klipper macro can be used to clean the print nozzle on command or imbedded in other gcode such as PRINT_START.  The code assumes a 350x350 print bed.  Adjust the settings to match your configuration.

#####################################################################
#   Nozzle Clean and Purge Bucket
#####################################################################    
[gcode_macro CLEAN_NOZZLE]
variable_start_x: 315
variable_start_y: 356
variable_start_z: 7.5
variable_wipe_dist: -50
variable_wipe_qty: 5
variable_wipe_spd: 200
variable_raise_distance: 20

gcode: {% if "xyz" not in printer.toolhead.homed_axes %} G28 {% endif %}

G90 ; absolute positioning

Move nozzle to start position

G1 X{start_x} Y{start_y} F6000 G1 Z{start_z} F1500

Wipe nozzle

{% for wipes in range(1, (wipe_qty + 1)) %} G1 X{start_x + wipe_dist} F{wipe_spd * 60} G1 X{start_x} F{wipe_spd * 60} {% endfor %}

Raise nozzle

G1 Z{raise_distance}

BOM

QTYP/NDescriptionLink
1BrushBrass Brushhttps://www.amazon.com/gp/product/B06XWFM1HJ
2M3x8Cap Screws 
2M3T-Nutshttps://www.amazon.com/Hulless-Sliding-Fastener-Aluminum-Accessories/dp/B08NZMD2BJ
610x2mmMagnetshttps://www.amazon.com/gp/product/B092MB697H

Tagi