NR200 PSU intake duct
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Duct to ensure the PSU in draws in fresh air through the side panel by filling the gap between it and the side panel.
- Ocena
- 5 / 5
- Polubienia
- 120
- Pobrania
- 773
- Wydruki
- 14
- Wyświetlenia
- 4945
- Oceny
- 14
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
This model snaps into the hole behind the power supply in the NR200 case through which the power supply intakes air. Normally there is a gap between the PSU and the ventilated side panel of the case, which allows the PSU to intake warm air from inside the case. With this duct that gap is mostly blocked off and the PSU is forced to intake fresh air through the mesh side panel.
The side should be such that it snaps and stays, if it doesn't you can either remove some material or add a layer of tape to make a good fit.