Star Wars r2-d2 r2d2 (puzzle) with windup leg
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small R2-D2 puzzle which is fully posable with hidden puzzle inside
- Ocena
- 4,125 / 5
- Polubienia
- 271
- Pobrania
- 829
- Wydruki
- 8
- Wyświetlenia
- 6543
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
*update* new harder version head available if you find this one to easy.
https://www.printables.com/model/597903-star-wars-r2d2-lvl2-hard-edition-puzzle-with-windu
Hey all couldn't find a a small r2-d2 that my rubbish printer could print with high details, so design a small 9cm tall model with deeper details and bigger gaps for those of you that don't have high end printers with small tolerances.
After a while it ended up turning into a posable model (with windup leg) with a hidden puzzle inside... hope you all enjoy it :)
The head and middle leg & foot needs no supports.
The main body needs supports at the very bottom for the 90 degree's overhangs, and you can use support blocks for the rest (as there was some weird support going on)
The Left and Right leg will need support in order to get a strong shoulder joint, and would suggest printing flat like pictures
infill for body and head I used 10%
as for all the legs I used 100% to make it as strong as possible due to the mechanical movements and stresses, but you could reduce if you want to experiment.
below is also a link for assembly
Print Settings
Printer:
ctc i3b
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
fine 0.1
Infill:
10% & 100%
Filament:
Category: Toys & Games