Additional (XboxOldie) additional drawers for shelf
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These drawers are a customized version of XboxOldie which fit emanuvele amazingly easy to print drawer tower. Thank…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 102
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
These drawers are a customized version of XboxOldie which fit emanuvele amazingly easy to print drawer tower. Thank you both for making such an awesome set.
The empty drawer I have modified for two different purposes. 1-2 split is a simple longitudinal division with a secondary split on the left side 50/50. For the second I created a dice drawer which will fit a full set of dice in each compartment.
Right, so after printing the shelves I noticed that the top shelf had some excess space. Well this triggered me a little when all the rest were so perfect and I made a top shelf that fits just right. Enjoy!
As you'll see everything just fits nice and snug into the drawer setup.
Print Settings
Printer:
Mega S
Rafts:
No
Supports:
No
Resolution:
0.3
Infill:
10-20%
Filament:
eryone PLA
Jet Black
Notes:
The infill for this drawer is not very important as the walls will be solid with <1mm wall size, it'll only change the infill for the drawer handle, which i would imagin you aren't going to abuse , right?
Category: Tool Holders & Boxes