Micro SD Card Wallet - less than 4 mm thick
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holds 16 Micro SDs and 1 standard SD card
- Ocena
- 4,933 / 5
- Polubienia
- 201
- Pobrania
- 1546
- Wydruki
- 18
- Wyświetlenia
- 5563
- Oceny
- 15
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Share Alike
Micro SD Card Wallet
Holds 16 Micro SDs and 1 standard SD card.
The tray contains the clipped in cards covered by a sliding lid.
Dimensions: 58 x 99 x 4 mm
Printing recommandations
PLA
0.3 mm layer height
4 perimeters, arachne mode is not needed (0.4 mm nozzle)
no infill
no supports
The model is optimised for PLA, it needs to be scaled by 101.5% when printing with PETG.
(
It seems that only Prusa PLA works out of the box.
It is recommended to print a test with your filament before. The micro SD card should fit into the tray without applying too much force. You may scale the model. 101.5% works fine with my PETG Prusa filament.
)
Update 20230811
Added a version optimised for Fillamentum PLA (v31).
Standard SD card wallet:
https://www.printables.com/model/1009490-sd-card-wallet-less-than-4-mm-thick