Double action hand pump nozzle attachments
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Found a pump in the trash with no nozzles so designed a new set based on my current pump nozzles.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 214
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
This has 4 parts to print. The essential part is the screw on interface which screws into the pump hose. The other 3 pieces are varying nozzle sizes which will hopefully fulfil all your pumping needs. Everything should screw into place quite tightly.
Print settings used:
- 0.2mm layer height
- 3 perimeters
- 4 bottom/top layers
- 30% density
- No supports
These came out super strong.
I added a loop on each part so a cord can be added to keep everything attached. I used a 2mm cord from decathlon to attach all the parts.
*Thread the cord through the interface before attaching it to the hose.