Ikea cabinet handle no drilling or holes required
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A friend of mine bought the ikea KNOXHULT cabinet and didnt want to drill holes in the cabinet door for the handles.…
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 105
- Wydruki
- 1
- Wyświetlenia
- 743
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
A friend of mine bought the ikea KNOXHULT cabinet and didnt want to drill holes in the cabinet door for the handles. So I designed and printed these for him.
These are friction fit to fit the 16.4mm thick cabinet doors. You can use some double sided tape or shim in a piece of thick paper for a tighter fit.
The models are suffixed with L and R for the relevant side , but you can also interchange the side and apply them vertically instead of horizontal (as suggested in the picture)
I have also added a cura screenshot for the suggested orientation to keep the handle sturdy.
Doesnot need supports, design and orientation takes care of that.
Print Settings
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20%
Notes:
For a more sturdy build, I recomend to use 3 wall lines (cura setting : wall count)
Category: Household