Featherboard for Bosch GTS10J table saw
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The nut from the original post was too big for my saw so I redesigned one based on the dimensions of my saw
- Ocena
- 4,5 / 5
- Polubienia
- 107
- Pobrania
- 544
- Wydruki
- 6
- Wyświetlenia
- 1933
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
The nut from the original post was too big for my saw so I redesigned one based on the dimensions of the miter slot on my saw.
After that I decided that the featherboard itself was a bit short so I lenghtened it by 5mm. I also increased the diameter of the knobs so that it is easier to turn and tightened the tolerances on the hexagonal cut. I deleted the text because it is not necesary for me.
The nut and knob have a supported version for those using a 0.6 nozzle.
The featherboard no longer fits in a prusa mini but the STP file is available if you need to modify it to your needs.