Rack-Mount Threaded Bar Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a threaded rod holder made for Rack-Mount. I was able to buy an old Rack-Mount, It's in my opinion the best…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 142
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
This is a threaded rod holder made for Rack-Mount.
I was able to buy an old Rack-Mount, It's in my opinion the best case for a 3d printer :)
I use this threaded rod holder with the help of my spool holder that clip in the spool.
See the video and photos.
Since most Rack-Mount differ, the SCAD can be changed to the desired dimension.
UPDATED 2014-12-22:
SCAD file and STL as been updated due to a small bug.
Instructions
- Set the desired dimension in the SCAD file (use openscad free software)
- Build from openscad
- Export to STL
- Print your object
You need 5M screw of at least 10mm, ideally 12mm, mine is 25, I used what I got :) and 2 5MM washers.
Category: 3D Printer Accessories