1 / 3
Simple Water Ball Valve, Hose and Gardena Fittings (print in place) — zdjęcie 1
1 / 3

Simple Water Ball Valve, Hose and Gardena Fittings (print in place)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a simple low-pressure water ball valve that can be printed in place.

Ocena
4 / 5
Polubienia
103
Pobrania
1423
Wydruki
1
Wyświetlenia
7165
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

This is a very simple emergency low-pressure water ball valve that can be printed quickly in place (print-in-place) and with no assembly.

ver. 1 with 0,3 mm tolerances (in optimization, with comments…)

Should be printed using mechanically resistant materials (test prints in PLA).

The valve is supplied as a test valve body and with simple hose or Gardena fittings.

(2023 - also hose to Gardena adapter valve is added)

 

 

p.s. for Gardena proprietary fittings you also need two O-rings. Print on the fitting face with valve cavity pointing upwards and supports on the baseplate.

Tagi