1 / 3
Simple Water Ball Valve, Hose and Gardena Fittings (print in place) — image 1
1 / 3

Simple Water Ball Valve, Hose and Gardena Fittings (print in place)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a simple low-pressure water ball valve that can be printed in place.

Rating
4 / 5
Likes
103
Downloads
1,425
Makes
1
Views
7,184
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution

This is a very simple emergency low-pressure water ball valve that can be printed quickly in place (print-in-place) and with no assembly.

ver. 1 with 0,3 mm tolerances (in optimization, with comments…)

Should be printed using mechanically resistant materials (test prints in PLA).

The valve is supplied as a test valve body and with simple hose or Gardena fittings.

(2023 - also hose to Gardena adapter valve is added)

 

 

p.s. for Gardena proprietary fittings you also need two O-rings. Print on the fitting face with valve cavity pointing upwards and supports on the baseplate.

Tags