1 / 7
Amiga keyboard case — zdjęcie 1
1 / 7

Amiga keyboard case

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Case for Amiga keyboard, similar to Amiga 3000 and Amiga 4000 cases.

Ocena
0 / 5
Polubienia
51
Pobrania
711
Wydruki
2
Wyświetlenia
4597
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Public Domain

This is a case for internal Amiga keyboard for creating an external keyboard from eg. Amiga 500 keyboard like I did. It it is very similar to Amiga 3000/4000 as I took the measurements from one, but likely not 100% matching as I don't own one so I could have compare the pieces after printing.

It just fits the Prusa Mini bed when manually fine tuning some of the supports in slicing phase. 

I printed this with PLA to prevent warping (which it still did some), but maybe ASA/ABS would be better in terms of attaching the parts together. I used super glue in the seams and then epoxy to enforce them. There's also holes for short screws to help keep the parts together.

Needs some post processing to get the looks perfect.

16th April 2024 update: I added a model files for complete base and top covers if you have a printer that can do the whole thing.

24th June 2026 update: Removed gcode files for now (I need to redo them) and fixed issue in bottom left part 3mf file where there was a gap in model.

Tagi