Baseball Pinball
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
2,16 € – 2,64 € netto (bez VAT)
Dla pliku: baseballaccesories_02mm_pla_mk25smmu2s_2h45m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 2,40 € netto (środek widełek).
- Masa podana przez autora
- 23 g
- Czas druku podany przez autora
- 2,74 godz.
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Hit a home run! At home and in your hands. With the first ever 3d printable baseball pinball here in Prusaprinters.
- Ocena
- 5 / 5
- Polubienia
- 233
- Pobrania
- 855
- Wydruki
- 3
- Wyświetlenia
- 7893
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Hit a home run! At home and in your hands. With the first ever 3d printable baseball pinball here in Prusaprinters.
Do you miss playing outside? This completely functional baseball-pinball can make you miss it a little less, have fun in the safety of your home with this Handy toy for all ages. Play it in versus mode or single player.
You can use the bearing ball included in the prusa´s kit.
UPDATE1: Added rubber band positioner (bat_bearing_ball_rubberband / field_bearing_ball_rubberband)
UPDATE2: Added longer bat.
Rules:
You can make your own rules, the main objective is to put the ball in the HomeRun hole or accumulate 4 bases.
Avoid the OUT holes
VS mode.
One player can throw the ball from the left or the right side and the other player hit it with the bat, the players alternate positions, the first to hit a home run or accumulate 4 bases wins.
If the pitcher hits a base hole, the throw counts as a ball (4balls = 1 base) and the pitcher must throw the ball again.
If the player at the bat misses the ball, it counts as a strike (3 strikes = loses the game.)
Use it for a tie breaker, for example the loser washes the dishes.
Several prints were made in order to make it fully functional and 3d printable friendly.
For me, this is the cutest functional 3D printable toy I have ever designed, "the Little players has its Little hats", I love it, I kind of remember me the polly pocket sets.
I'm working on the scoreboard, if there is enough interest I may add it in the files, also new field configurations, just let me know in the comments.
Please let me know about the fits, it worked for me (a barely functional Mk2.5s MMU2S), but you may need some glue or sand paper.
Print instructions
Several prints were made in order to make it fully functional and 3d printable friendly.
Print it in the provided positions, just add support for the "slide" and "players support" files.
Includes multicolor and single color files.
Multicolor version included also pre sliced for MMU2S
Single color version files include "bearing ball" in the file name.