Robot 4 Kids - Kidsbot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small robot for kids to use with open roberta lab. https://lab.open-roberta.org/ hint: any useful feedback is welcome
- Ocena
- 0 / 5
- Polubienia
- 27
- Pobrania
- 125
- Wydruki
- 0
- Wyświetlenia
- 922
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
Overview
Hi,
I created this robot to teach children about programming.
I thought it was a great idea and fun for the kids to program and watch the robot drive.
Its features:
Sensors:
> Line sensor TCRT5000
> Distance sensor HC-SR04
> LDR
Actuators:
> 2x TT motors
> 1x Buzzer
> 2x LEDs
Interfaces:
> IR-Remote
Additional
> 1x pushbutton
The controller is an Arduino Nano.
The special feature is that the robot can be programmed with the graphical programming environment "open roberta lab".
https://www.roberta-home.de/lab/
Electronics:
You can find the schematic in the attachment.
Assembly / additional parts:
You need some screws and nuts (M3) and some 3d screw insert (M3).
A steel ball (6mm) is needed of the support wheel.
Print instructions
I usually use PLA for the prints with the default settings for 0.20mm layer height.
(no supports, 15% infill)
hint: any useful feedback is welcome
Updates:
12.12.2022: updated version of the chassis lid (V2)
13.12.2022: Assembly instruction added
15.01.2023: updated version of the chassis lid (V3)