Robot 4 Kids - Kidsbot
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small robot for kids to use with open roberta lab. https://lab.open-roberta.org/ hint: any useful feedback is welcome
- Rating
- 0 / 5
- Likes
- 27
- Downloads
- 125
- Makes
- 0
- Views
- 922
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
Overview
Hi,
I created this robot to teach children about programming.
I thought it was a great idea and fun for the kids to program and watch the robot drive.
Its features:
Sensors:
> Line sensor TCRT5000
> Distance sensor HC-SR04
> LDR
Actuators:
> 2x TT motors
> 1x Buzzer
> 2x LEDs
Interfaces:
> IR-Remote
Additional
> 1x pushbutton
The controller is an Arduino Nano.
The special feature is that the robot can be programmed with the graphical programming environment "open roberta lab".
https://www.roberta-home.de/lab/
Electronics:
You can find the schematic in the attachment.
Assembly / additional parts:
You need some screws and nuts (M3) and some 3d screw insert (M3).
A steel ball (6mm) is needed of the support wheel.
Print instructions
I usually use PLA for the prints with the default settings for 0.20mm layer height.
(no supports, 15% infill)
hint: any useful feedback is welcome
Updates:
12.12.2022: updated version of the chassis lid (V2)
13.12.2022: Assembly instruction added
15.01.2023: updated version of the chassis lid (V3)