5" Touchscreen Extrusion Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a extrusion mount for a 5" LCD touchdisplay from Joy-It. It also holds some cutouts for letting cable through…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 217
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a extrusion mount for a 5" LCD touchdisplay from Joy-It. It also holds some cutouts for letting cable through the side (for the stepper above). The red dice is only shown on the images, its not included in the stl files.
I'm using it for displaying Octodash directly on the printer.
It consist out of three parts which needs to be plugged together and screwed in place. I'm using M3 press nuts with a depth of 5mm. Six of them need to be inserted on the front plate and one on the backplate facing backwards.
Print Settings
Printer:
Hypercube Evolution
Rafts:
No
Supports:
Yes
Resolution:
0.15
Infill:
15%
Filament:
dasFilament PETG
Black
Notes:
I was printing the back of the case and the mount with a brim to ensure adhesion on the thin walls.
Category: 3D Printer Parts