PS4 Foot 4 Better Cooling or another Box or what else
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Update Version 3 with Anti Vibration Rubber Inlays and Rubber Bottoms If you have a Vibrating Issue download these and…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 353
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Update Version 3 with Anti Vibration Rubber Inlays and Rubber Bottoms
If you have a Vibrating Issue download these and print in flexible Filament and glue it.
These are Optional.
Update Version 2 now with Logos
I made this Foot for a better cooling of my PS4. i also changed the Thermal Paste it is better but with this little fix i thinks its better with the Gap. The Gap allows more Air Flow and does not save the Heat. You can use that foots for what else. I printed it in Rubber Filament so it may absorb vibrations but other Materials also should work. Have fun with it and write what could i even make better.
Optional: You can add a sticky felt on bottom
Stay updated it.
Print Settings
Printer Brand:
Ultimaker
Printer:
Ultimaker 2
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
15
Notes:
Just check that first Layer is sticked to Bed because of warping Effects.rnIts easy to print.rnrnParts need to print: 4
Category: Electronics