Low Profile VESA Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Needed a low profile VESA mount for MagicMirror dashboard.
- Ocena
- 5 / 5
- Polubienia
- 43
- Pobrania
- 236
- Wydruki
- 3
- Wyświetlenia
- 1588
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial
Originally needed a low profile VESAmount that would allow me to mount my magic mirror on the wall to use as a dashboard. Most of the ones I found were either too close or too far so I created one that will sit close to the wall but still allow a raspberry pi to be placed behind the monitor. Total thickness of the mount is 0.76 inches.
Print Instructions:
Layer Height: 0.2mm
Walls: 3 (add more if your monitor is heavier)
Infill: 20%
Material: PETG (can be whatever you print but mind the strenght and weight of the item you are mounting)
Support: Yes
Additional: Please look at the last images to see the print orientation that will use the least amount of support.