Low Profile VESA Wall Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Needed a low profile VESA mount for MagicMirror dashboard.
- Rating
- 5 / 5
- Likes
- 43
- Downloads
- 236
- Makes
- 3
- Views
- 1,588
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial
Originally needed a low profile VESAmount that would allow me to mount my magic mirror on the wall to use as a dashboard. Most of the ones I found were either too close or too far so I created one that will sit close to the wall but still allow a raspberry pi to be placed behind the monitor. Total thickness of the mount is 0.76 inches.
Print Instructions:
Layer Height: 0.2mm
Walls: 3 (add more if your monitor is heavier)
Infill: 20%
Material: PETG (can be whatever you print but mind the strenght and weight of the item you are mounting)
Support: Yes
Additional: Please look at the last images to see the print orientation that will use the least amount of support.