Vise with bench attachment
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Updated parts for Fast-Operation Vise to be attached to a benchtop
- Ocena
- 4,778 / 5
- Polubienia
- 216
- Pobrania
- 651
- Wydruki
- 11
- Wyświetlenia
- 3798
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I use the Fast-Operation Vise for soldering circuit boards but wanted to lock down the vise to my table. I generated two cutouts in the left and right base parts along with a 3mm hole to pin down the vise. This way you can attach the legs to the table and release the vise easily if needed.
I did not include all the original STL files so grab them from here. Other than the two updated vise_base parts, all of the other components are unchanged.
The leg is symmetrical so just print two. Included is one with a 6mm slot and another with a 4mm slot dependent on how you plan to attach. There is nothing complex with the attachment pins. I just used 4 ( 3mm x 16mm ) bolts but you could print a 3mm pin if desired.
Let me know if there is feedback. I am always up for refining the design.