Vise with bench attachment
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Updated parts for Fast-Operation Vise to be attached to a benchtop
- Rating
- 4.778 / 5
- Likes
- 216
- Downloads
- 651
- Makes
- 11
- Views
- 3,798
- Reviews
- 9
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I use the Fast-Operation Vise for soldering circuit boards but wanted to lock down the vise to my table. I generated two cutouts in the left and right base parts along with a 3mm hole to pin down the vise. This way you can attach the legs to the table and release the vise easily if needed.
I did not include all the original STL files so grab them from here. Other than the two updated vise_base parts, all of the other components are unchanged.
The leg is symmetrical so just print two. Included is one with a 6mm slot and another with a 4mm slot dependent on how you plan to attach. There is nothing complex with the attachment pins. I just used 4 ( 3mm x 16mm ) bolts but you could print a 3mm pin if desired.
Let me know if there is feedback. I am always up for refining the design.