1 / 3
Filament Grommet/Slot Cover for IKEA Lack Tabel
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A filament grommet/slot cover for the IKEA Lack table
- Ocena
- 4,5 / 5
- Polubienia
- 63
- Pobrania
- 97
- Wydruki
- 3
- Wyświetlenia
- 1273
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 3) (Komentarze: 7)Remiksy (0)Kolekcje (118)Powiązane
I drilled two 8 mm holes into the table, cut a slot between the holes with a Dremel and glued the prints from above and below into the slots.