Ikea Table Adjustable Leg Repair Sleeve
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A compression sleeve to repair broken adjustable legs on an Ikea table
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 26
- Wydruki
- 1
- Wyświetlenia
- 173
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a compression sleeve that can be used to repair an Ikea table that has adjustable legs that are broken and will not stay extended.
Print this with 70% infill and supports. The supports can be cut away easily with a knife although don't get too aggressive. Print it with the smaller inside diameter on the bottom. I used PLA and had no issues.
The design itself was created with OpenSCAD. If you have OpenSCAD, you can adjust all the parameters for the sleeve and perhaps use it for other applications. If you don't have OpenSCAD, an STL file is also provided.
This and all my OpenSCAD designs are available on my GitHub repository.
Good luck and let me know if you were able to print and use this for your own application.