Ender 3/Pro/V2 Z Axis Stabilizer and Timing Belt

I was having some problems with my X axis sagging on the side that had no Z screw, so I purchased a dual Z axis kit and printed the parts to stabilize and synchronize the two Z axes. The slot for the ball bearing is an elliptical shape, allowing for any difference in the alignment of different z-rods. 

BEFORE MAKING THIS: 

This is the original prototype, so if you want a much better version, here is the one by JEBurroughs: https://www.printables.com/model/348565-ender-3prov2voxelab-aquila-z-axis-stabilizer-using .

Here is the Timing Belt on Amazon:

https://www.amazon.com/gp/product/B08JHVCZ8D/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

The Ball Bearings:

https://www.amazon.com/uxcell-Bearing-8x16x5mm-Shielded-Bearings/dp/B07Z3F68H4/ref=sr_1_2?crid=QBHLE4T96YZH&keywords=small+flanged+ball+bearings+8mm+x+16mm+x+4&qid=1665970053&s=industrial&sprefix=small+flanged+ball+bearings+8mm+x+16mm+x+4%2Cindustrial%2C83&sr=1-2

I had some extra screws and hardware lying around, I used all 8/32'' screws and nuts, along with some spare Creality parts for anchoring.

To assemble, take the round cap and the flat cap and glue the flat sides together. then that piece should fit snugly into the top of the sprocket. Refer to the photos for reference.