TStak Drawer Organizers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Organizers that easily lift in and out of the TStak two drawer boxes.
- Ocena
- 5 / 5
- Polubienia
- 101
- Pobrania
- 490
- Wydruki
- 4
- Wyświetlenia
- 4037
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Simple organizer design to separate small parts in the dewalt two drawer tstak boxes. They can easily be lifted out as needed. Several versions available depending on what you are storing. I’ve found the 2x2 to work especially well for small hardware and the 3x1 to work great for heat shrink storage.
These were printed with a 0.6mm nozzle, so the walls are set to 1.2mm thick. I found this to be plenty strong enough without sacrificing much interior storage volume. The height was set as to be able to easily fit them in the back row, which is partially blocked when the drawer is all the way open.