1 / 5
Seifenschale Seifenbox Schale für Seife  (z. B. von SANTE mit 60x60 mm) / Soap dish Soap box dish for soap (e.g. from SANTE with 60x60 mm) — zdjęcie 1
1 / 5

Seifenschale Seifenbox Schale für Seife (z. B. von SANTE mit 60x60 mm) / Soap dish Soap box dish for soap (e.g. from SANTE with 60x60 mm)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Seifenschale Seifenbox Schale für Seife (z. B. von SANTE mit 60x60 mm) / Soap dish Soap box dish for soap (e.g. from SA

Ocena
5 / 5
Polubienia
12
Pobrania
124
Wydruki
3
Wyświetlenia
683
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Bathroom
Licencja
Creative Commons — Attribution — Noncommercial

DE:
Seifenschale / Seifenbox / Schale für Seife
Ideal für Seifengröße von 60x60 mm (z. B. von SANTE mit 60x60x20 mm)

Maße der Schale:
Außen: 80x80 mm
Innen:  76x76 mm (Wandstärke: 2 mm)

Hinweise zum Druck:
Ich habe PETG verwendet, da die Temperaturen der Spülmaschine für PLA zu hoch sind und sich PLA daher verformt. Wenn die Schale nicht in die Spülmaschine gegeben wird, spricht nichts gegen die Verwendung von PLA. (Ich würde die Schale auch mit PETG nicht in die Spülmaschine geben sondern nur mit laufwarmen Wasser von Hand waschen.)
Der Druck benötigt keine Stützstrukturen.


EN:
Soap dish / Soap box / dish for soap
Ideal for soap size of 60x60 mm (e.g. from  SANTE with 60x60x20 mm).

Dimensions of the shell:
Outside: 80x80 mm
Inside: 76x76 mm (wall thickness: 2 mm)

Notes on printing:
I used PETG because the temperatures of the dishwasher are too high for PLA and therefore PLA deforms. If the bowl is not put in the dishwasher, there is nothing against using PLA. (I would not put the tray in the dishwasher even with PETG but only wash it by hand with running warm water).
The print does not need any support structures.

Tagi