3M Adapter for Cheap Snorkel Mask Full Face
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I bought a cheap face mask on amazon hoping the inlet would match one of the other prints here. It didn't :-(...
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 107
- Wydruki
- 0
- Wyświetlenia
- 1208
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution
I bought a cheap face mask on amazon hoping the inlet would match one of the other prints here. It didn't :-(... So, I created a custom adapter for it!
Print instructions
You can get this full face mask from Amazon for 22 bucks! (Link below):
MOUNTDOG Snorkel Mask Full Face - https://amzn.to/2xwc3zO
You will need a rubber washer of some type for the seal on the N95 3M Filter Cartridge.
If you can't get one online, you may need to get creative... Cut a bike intertube, rubber mats, not sure, I cut a silicone washer on our laser.
I made some improvements from the ones for the other masks.
3M filters need to stay dry. The only way to do that is by using a check valve. The mask has one for purging water out but not at the top. You breathe in and out at the top. I plugged the exhale holes on the top so that you exhale through the purge ports at the mouth.
If you have trouble breathing with this, I provided a model without that plug.
I will post any improvements I make on this on here.