DeLonghi Ecam Eletta Water Basin Plug
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This Plug fixes the spring-loaded valve on the water basin of the DeLonghi Ecam Eletta 45.766 Coffee maker
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 611
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
If you're like me, you might have Dropped the Water Basin of your very expensive Delonghi Ecam Eletta capuchino Machine... For me, this little part broke, and the rubber-valve and Spring didn't hold in the basin anymore and once i removed the basin from the machine, i could observe laminar flow for the firsttime, as all the water ran out of the basin.
After collecting the rest of the plastic Parts, 30 minutes Later, i was already printing this replacement part. It saved me 75 Bucks for a new Basin, and was printed in less than half an hour! :)