Pen & Hobby Tool Organizer Cup
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A soda can sized cup for holding all your pens and hobby tools! Takes roughly 2 hours and 40 minutes to print.
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 160
- Wydruki
- 2
- Wyświetlenia
- 446
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
This is a simple little cup for all of your pen and hobby tool holding needs! It's roughly the size of a soda can, being 66mm in diameter and 101mm in height.
On my Ender 3, which is stock except for a silent stepper board upgrade, this print took roughly 2 hours and 40 minutes with my settings.
I printed this with an Ender 3 with the “standard quality” Cura settings, but with a few modifications:
Layer Height: 0.3mm
Infill Density: 10%
Infill Pattern: Zig Zag
Printing Temp: 205
Bed Temp: 65
Flow: 105%
Print Speed: 90mm/s
Infill and Inner Wall Speed: 70mm/s
Outer Wall Speed: 60mm/s
Adhesion Type: Skirt