Pen & Hobby Tool Organizer Cup
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A soda can sized cup for holding all your pens and hobby tools! Takes roughly 2 hours and 40 minutes to print.
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 160
- Makes
- 2
- Views
- 446
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
This is a simple little cup for all of your pen and hobby tool holding needs! It's roughly the size of a soda can, being 66mm in diameter and 101mm in height.
On my Ender 3, which is stock except for a silent stepper board upgrade, this print took roughly 2 hours and 40 minutes with my settings.
I printed this with an Ender 3 with the “standard quality” Cura settings, but with a few modifications:
Layer Height: 0.3mm
Infill Density: 10%
Infill Pattern: Zig Zag
Printing Temp: 205
Bed Temp: 65
Flow: 105%
Print Speed: 90mm/s
Infill and Inner Wall Speed: 70mm/s
Outer Wall Speed: 60mm/s
Adhesion Type: Skirt