1 / 8
Canon G12 (G10 and G11) Filter Holder 77mm — zdjęcie 1
1 / 8

Canon G12 (G10 and G11) Filter Holder 77mm

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I created this filter adapter because I recently converted my old Canon G12 to view full spectrum light (using this…

Ocena
0 / 5
Polubienia
9
Pobrania
72
Wydruki
0
Wyświetlenia
704
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution

I created this filter adapter because I recently converted my old Canon G12 to view full spectrum light (using this tutorial: https://www.lifepixel.com/tutorials/infrared-diy-tutorials/canon-powershot-g12-ir )

I did not want to fully commit to the conversion so I did not replace the infrared cut filter with an infrared pass filter, so I need to use one externally. That's where this thing comes in. Since I already own a wide range of 77mm filters I decided to design this adapter to mount on the accessory flange of the G12.

  • Assembly

This mount should fit snuggly and even click into place with the locking tab. I've added a locating dimple to help line up the adapter. You will need a 62-77mm step-up ring filter adapter to complete this, or I suppose you could even use 62mm filters if you have them. I used the filter adapter though to create a nice smooth way of transitioning from 3D printed plastic to the fine threads of the filters.

  • Parts

This is the step-up adapter that I used: https://www.amazon.com/dp/B0002ER2OQ/ref=cm_sw_r_tw_dp_U_x_E1GzCbSB0600V

There is one small problem of vignetting when zoomed all the way out, I have included a file that will accept a 72-77mm adapter.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

Doesn't Matter

Supports:

Yes

Resolution:

0.2

Infill:

100%

Filament: Amazon Basics PETG Black

Category: Camera

Tagi