Washer tapered 4x12mm (0,16x0,5 inch) 7 degrees
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
when the angle of one of my designs proved to be a little too flat I wanted to print a new one. After the wedge I…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 98
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
when the angle of one of my designs proved to be a little too flat
I wanted to print a new one. After the wedge I thought that a
tapered washer would do the job better be smarter/faster/more economic.
The washer diameter is 4x12mm (0,16x0,5 inch) 5mm thick and a 7 degrees slope
You can print it 1x or 4x, both files are added.
Printed in PETG, vertical ! I used infill 20%. You could also opt for 100% if
it has to be ridged.
Please like, subscribe and return your comments.
Feel free to donate, thank you.
Category: DIY