Washer tapered 4x12mm (0,16x0,5 inch) 7 degrees
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
when the angle of one of my designs proved to be a little too flat I wanted to print a new one. After the wedge I…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 12
- Makes
- 0
- Views
- 99
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
when the angle of one of my designs proved to be a little too flat
I wanted to print a new one. After the wedge I thought that a
tapered washer would do the job better be smarter/faster/more economic.
The washer diameter is 4x12mm (0,16x0,5 inch) 5mm thick and a 7 degrees slope
You can print it 1x or 4x, both files are added.
Printed in PETG, vertical ! I used infill 20%. You could also opt for 100% if
it has to be ridged.
Please like, subscribe and return your comments.
Feel free to donate, thank you.
Category: DIY