Revo Nozzle Holder

My design for a modular E3D Revo nozzle holder. 

I wanted something that fitted to my printer (PrusaMK3s), wasn't too large, could take at least 3 nozzles and looked a bit funky.

UPDATE - This design has been expanded and is now compatible with my magnetic reverse bowden system - see picture below. Link: https://www.printables.com/model/465985-magnetic-reverse-bowden-system 

Each clip will hold one Revo nozzle, and a short and a long clip pair will tile together. You can expand to include a home for as many or as few nozzles as you have. 

There are three files; 

• A pair of clips - long and short
• A pair of clips - with attachment for a separate coloured hex insert
• and a separate hex top insert

There are .stl and .3mf versions of each.

The nozzles themselves are modeled up here: https://www.printables.com/model/293971-e3d-revo-nozzles 

The ‘back’ holders are 2mm taller than the front ones to give a staggered appearance, and the 2-part versions are each 1mm taller than their single-body counterparts. They are all interchangeable and will all tessellate together fine. 

You will need to arrange the files for printing, but that should be pretty straight forward. I would suggest printing in pairs though. Everything prints fine without supports, and I did mine on a 0.2 layer height.

If you are doing the two colour variant, use a few drops of superglue to fix the hex insert in.

It would be cool to colour-match the hexagons to the Nozzle socks, but I didn't have yellow or green. Prusa orange looked the part for me though!

This system is also fully compatible with a reverse bowden setup I've drawn up. Link here if anybody is interested. https://www.printables.com/model/465985-magnetic-reverse-bowden-system