1 / 5
Unifi G4 Doorbell Wedge (90 degree) — zdjęcie 1
1 / 5

Unifi G4 Doorbell Wedge (90 degree)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Orientacyjna cena wydruku pliku

5,22 € – 6,38 € netto (bez VAT)

Dla pliku: Wedge_0.6n_0.2mm_PLA_MINI_4h46m.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 5,80 € netto (środek widełek).

Masa podana przez autora
94 g
Czas druku podany przez autora
4,77 godz.
Materiał u źródła
PLA
Materiał wyceny
PLA
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

90 degree wedge for the Unifi G4 doorbell

Ocena
0 / 5
Polubienia
4
Pobrania
70
Wydruki
0
Wyświetlenia
827
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

None of the existing wedges for the G4 doorbell fit my needs, so i made one that did.

This wedge puts the doorbell at 90 degrees to the door for doorbells that are mounted perpendicular to the door.

I didn't trust the snap-on mounting to the original doorbell mounting plate (or my designing skills), so this mount is made to fit 2 M4 threaded (pictures show M5, but that has been changed afterwards) inserts so that the doorbell can be secured to the wedge using countersunk M4 screws no longer than 40 mm.

The wedge itself is mounted using either keyhole slots or 2x 4 or 4.5 mm woodscrews of appropriate length.

My print:
Filament: Polymaker Polylite PLA (doesn't quite match the doorbell, unfortunately)
Layer height: 0.15 mm
Nozzle size: 0.6 mm
Infill: 15%

I printed it standing up, with supports for the screw holes and the large inner cavity. It takes a bit of work to remove everything, but it makes the curve look better.

Tagi