Faucet Knob Replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A knob of the kitchen tap came loose. To repair the faucet the knob had to be replaced.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 136
- Wydruki
- 0
- Wyświetlenia
- 506
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Public Domain
One of the kitchen faucet knobs came loose and could not be installed anymore. A plastic mounting clip broke and finally got lost. In the following picture you can see this part is missing in the upper knob.
Since a replacement clip would not be printable (FDM), a new knob was required. After using the new knob for a while to prove its functionality, the other knob was replaced as well for optical reasons.
Printing:
I printed the knob body in white Prusament PETG with a 0.4mm nozzle and 0.15mm layer height.
For the color dot I used Prusament PLA Blend in Royal Blue / Miss Pink, 0.4mm nozzle, 0.2mm layer height, concentric bottom infill pattern.
The dot was fixed on the body using superglue.