Power Brick Cable Management Supports
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Supports to aid in the mounting of power bricks to walls and beneath desks. Spacers can be inserted as needed.
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 48
- Wydruki
- 2
- Wyświetlenia
- 565
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
A set of supports of various sizes in order to better hide power supply bricks for cable management. Choose the size up from the thickness of your power brick and use spacers as desired for a tighter fit. The listed dimensions are the maximum thickness of power brick which can fit inside each brace.
You will need 4 copies of each for each brick for mounting under a desk and at least two if you want to mount on a wall.
They can be printed without supports. The spacers should be flipped to print on their square side.
There is room for a screw to be added for optimal mounting strength to your surface.