Mosquito Magnum 40mm Fan Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This was made for the Bondtech LGX Lite Arrow on the CR-10 Smart. But should be compatible with other installs.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 94
- Wydruki
- 0
- Wyświetlenia
- 546
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this after upgrading to the Bondtech LGX Lite Arrow on the CR-10 Smart, with a Mosquito Magnum hot end.
There were quite a few designs out there already for mounting a 40mm fan over the Slice Engineering 25mm fan that's available, but I wanted it to sit in line with the front ventilation on the Arrow.
It can be printed either face up or face down with PETG. I found it easiest to print it in the orientation that it is with supports for the two mounting holes.
If you have found this useful please like and possibly leave a comment as well as posting your make.