1 / 3
Mosquito Magnum 40mm Fan Mount — image 1
1 / 3

Mosquito Magnum 40mm Fan Mount

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This was made for the Bondtech LGX Lite Arrow on the CR-10 Smart. But should be compatible with other installs.

Rating
0 / 5
Likes
11
Downloads
94
Makes
0
Views
546
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

I designed this after upgrading to the Bondtech LGX Lite Arrow on the CR-10 Smart, with a Mosquito Magnum hot end.

There were quite a few designs out there already for mounting a 40mm fan over the Slice Engineering 25mm fan that's available, but I wanted it to sit in line with the front ventilation on the Arrow.

It can be printed either face up or face down with PETG. I found it easiest to print it in the orientation that it is with supports for the two mounting holes. 

If you have found this useful please like and possibly leave a comment as well as posting your make.

Tags