Voron 0.1 Motor Panel mod for Umbilical
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cover for Voron umbilical connector board. Raised to sit flat to the board - proud of the rear soldered wires
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 113
- Wydruki
- 0
- Wyświetlenia
- 901
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
I needed a cover that would fit the Voron 0.1 Umbilical, unfortunately the original motor-cover had the wire entry point on the wrong side. Plus if would be resting on the wire traces on the back of the umbilical-board.
This mix has the Voron grid on it, and a raided rim so it sits flat on the umbilical-board.
Printed here in two colour petg (as easy to print multicolour). I believe petg will cope fine with the temperatures at the top back of the printer, plus it's resting horizontally on the board, so shouldn't sag.
Printer is part disassembled in photo - so please ignore all the messy wires, and missing zip ties etc.