Button Style to Universal Rearview Mirror Adaptor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Converts a button style rearview mirror base to one that can hold a universal mount.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 257
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model was born of the desire to save money. I needed to replace my FR-S's rearview mirror. The FR-S and many Subaru vehicles (possibly others) use a button style mount that does not play well with universal mount replacement mirrors. I created this adaptor (on tinkercad) to allow me to use the windshield side of the button mount with the replacement universal mount (wedge shaped). It has saved me roughly $200 so I hope it also helps others do the same.
Note: The tab at the top is thin to slide between the mounts and is only there as a backup to help stop the adaptor from sliding down.
I suggest printing this using a heat resistant filament especially if your car lives outdoors.
I printed this on my MK3S+ in ABS (best heat resistance filament I currently have). You will need to print with supports and I used 20% infill for mine.