1 / 1
Adapter to adapt a stick to a snow shovel
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The original stick was broken, so I have designed an adapter to use a cylindrical stick.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 227
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
The part is printed with PETG and need supports. The bore for the stick have a diameter of 28mm.
To fix the adapter to the snow shovel, use hexagon nuts M5 (2x) and cylinder screws M5x15 (2x). For clamping the stick, use hexagon nuts M4 (3x), washers for M4 (3x) and screws M4x25 (3x).