Shower head adapter (for small gap holder)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix, the requirement is something different, but since the model of Kiytan is basically good, I remixed it.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 117
- Wydruki
- 4
- Wyświetlenia
- 598
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The problem: I have changed the shower head in our shower (simple task... or not after all)
Unfortunately, the new shower head has a different angle and the existing holder could not be brought into the desired position, so I got constantly floddings in the bathroom as the water jet came to a position where rails of the shower wall are mounted.
The Solution:
Now I could either replace the complete holder system on the wall or the head (in the hope that I find one that has the desired angle).
When I saw the model of Kiytan I thought, now the solution is found. However, it turned out that the model was not usable (for me and my problem) because it is intended for a bracket with much larger gap. Therefore, I adapted it with a spacer so that it now also fits on a wall mount with the smaler gap.
Nevertheless because of the design / idea all credit goes to Kiytan.
Material: PETG
Nozzle: 0,4
Layer height: 0,16 (wlórks also with 0,2)
Infill: 10%
Print speed: 45mm/s
Print time: about 2 hours because I print slowly
UPDATE:
The wall thickness has been increased and the connecting piece reinforced. When printing with PLA, deformation can still occur in the long term, so I recommend PETG.