Shower head adapter (for small gap holder)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a remix, the requirement is something different, but since the model of Kiytan is basically good, I remixed it.
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 118
- Makes
- 4
- Views
- 600
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The problem: I have changed the shower head in our shower (simple task... or not after all)
Unfortunately, the new shower head has a different angle and the existing holder could not be brought into the desired position, so I got constantly floddings in the bathroom as the water jet came to a position where rails of the shower wall are mounted.
The Solution:
Now I could either replace the complete holder system on the wall or the head (in the hope that I find one that has the desired angle).
When I saw the model of Kiytan I thought, now the solution is found. However, it turned out that the model was not usable (for me and my problem) because it is intended for a bracket with much larger gap. Therefore, I adapted it with a spacer so that it now also fits on a wall mount with the smaler gap.
Nevertheless because of the design / idea all credit goes to Kiytan.
Material: PETG
Nozzle: 0,4
Layer height: 0,16 (wlórks also with 0,2)
Infill: 10%
Print speed: 45mm/s
Print time: about 2 hours because I print slowly
UPDATE:
The wall thickness has been increased and the connecting piece reinforced. When printing with PLA, deformation can still occur in the long term, so I recommend PETG.