1 / 4
Steam Deck - Official Valve Dock Adapter for SPIGEN rugged Armor Case
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix for the Spigen Rugged Armor. The killlwitch version gets the Steam Deck "floating"
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 1306
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution
This is my Remix to get the spigen Rugged Armor PERFECT FIT on the dock.
I dont plan to do a “tool free version” , cause I feel you need the m3 screws to adjust preassure and get all firm and secure to the original Dock.
From original creator with the killswitch version
https://www.printables.com/model/294788-steam-deck-valve-dock-adapter-for-dbrand-killswitc
Hardware required:
- 2 x m3x14mm bolt
- 2 x m3x16mm bolt
- if not using clamps, replace with 2 x m3x14mm bolt
- 4 x m3 nut
How to Install:
- Insert m3 nuts into the slots at each end of the bridges, oriented similarly to the slot wall shape.
- Sandwich bridges between dock inserts, screw M3 screws through insert holes and into the nuts in the bridges.
- If using clamps, sandwich inserts and bridges between clamps and screw thru clamps into insert/bridge sandwich (see photos).