Grin Technologies Baserunner Bicycle Frame Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Baserunner Bicycle Frame Mount, designed to attach with heatsink (100X40X11mm).
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 245
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Share Alike
Baserunner Bicycle Frame Mount, designed to attach with heatsink (100X40X11mm).
I designed this to attach to either the down or seat tube on a normal bicycle frame. I ended up having a failed Phaserunner due to something going horribly wrong during programming that caused it to be unusable. I bought the Baserunner as a backup controller so I designed this to make use of it during the time I was without a viable controller.
As a heads up, the heatsink I purchased was from Ebay, if this seller goes away I've provided the dimensions 100mm by 40mm by 11mm.
https://www.ebay.com/itm/1X-3-Pcs-Aluminium-Power-Amplifier-Heatsink-Heat-Sink-100X40X11mm-B5D3-/254957725380
I also just used zip ties from the Harbor Freight. They are nothing special but any medium sized zip tie should work.
I am getting more proficient at FreeCad but this designed I hesitated to post because I still wasn't confident, but I need to probably rework the cad model with a Spreadsheet to make it more parametric.