Grin Technologies Baserunner Bicycle Frame Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Baserunner Bicycle Frame Mount, designed to attach with heatsink (100X40X11mm).
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 16
- Makes
- 0
- Views
- 245
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Share Alike
Baserunner Bicycle Frame Mount, designed to attach with heatsink (100X40X11mm).
I designed this to attach to either the down or seat tube on a normal bicycle frame. I ended up having a failed Phaserunner due to something going horribly wrong during programming that caused it to be unusable. I bought the Baserunner as a backup controller so I designed this to make use of it during the time I was without a viable controller.
As a heads up, the heatsink I purchased was from Ebay, if this seller goes away I've provided the dimensions 100mm by 40mm by 11mm.
https://www.ebay.com/itm/1X-3-Pcs-Aluminium-Power-Amplifier-Heatsink-Heat-Sink-100X40X11mm-B5D3-/254957725380
I also just used zip ties from the Harbor Freight. They are nothing special but any medium sized zip tie should work.
I am getting more proficient at FreeCad but this designed I hesitated to post because I still wasn't confident, but I need to probably rework the cad model with a Spreadsheet to make it more parametric.