Telescope Finder Scope Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This mount has more adjustment than the average mount. My original mount was warped and couldn't be aligned.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 129
- Wydruki
- 1
- Wyświetlenia
- 829
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution — Noncommercial
This finder scope mount has more adjustment than the original, while still using the standard thumb screws. Pretty solid mount, so don't worry about it wiggling about. its for a 2 hole mount on the Telescope. No drilling required the bolts will just thread in, I used m3 screws for the front. you could use just 1 on the front instead of all 3.
standard print settings. I used 0.6mm nozzle and 0.3 layers and it was good.
Don't forget to post your makes, and give me feedback if it needs any improvements.